 |
| Quantity: | |
|---|---|
KPTCA
1. Excellent core feeding performance.
2. Stable super lubricity hydrophilic coating, smooth delivery.
3. We cut according to the diameter of the balloon, 1.0-1.25mm can be cut into 2 wings, 1.5-5.0mm is usually 3 wings, if the diameter is more than 6.0mm, we can evenly cut into 6 wings, and then wound to keep the outline of the balloon small enough.
4. Advanced laser bonding technology between balloon and catheter provides excellent conveying performance.
5. The soft tapered tip provides a smooth transition from the guide wire port to the balloon catheter, making a great cross through the blood vessel or even a curved one.
6. Cutting edge laser forming technology is needed to make the balloon's entrance much smaller. This allows the balloon to pass through the lesion more easily.
7. To improve stability and torque transfer, we choose UV curing adhesive.
8. Positive and negative pressure test can maintain the air tightness of the whole balloon catheter. Different technical specifications can meet different requirements.
9. Our balloon catheters have a pressure of 12atm and are rated to rupture at 22atm.
10. Provides accurate expansion pressure concentration, extremely low compliance, low expansion rate from NP to RBP.
11. The short shoulder design minimizes the excessive expansion of both sides of the balloon, mainly focusing on the expansion of the lesion area and reducing the injury to normal blood vessels during the operation.
12. Excellent repackaging performance of the balloon, easy to take out after expansion.
| P/atm D/mm | Tolerance of Compliance:±5% | ||||||
| 6 (NP) | 8 | 10 | 12 | 14 | 16 (RBP) | 18 | |
| 1.5 | 1.50 | 1.53 | 1.56 | 1.59 | 1.62 | 1.65 | 1.68 |
| 2.0 | 2.00 | 2.03 | 2.06 | 2.09 | 2.12 | 2.15 | 2.18 |
| 2.5 | 2.50 | 2.54 | 2.58 | 2.61 | 2.64 | 2.67 | 2.70 |
| 2.75 | 2.75 | 2.79 | 2.83 | 2.86 | 2.89 | 2.92 | 2.95 |
| 3.0 | 3.00 | 3.04 | 3.08 | 3.11 | 3.14 | 3.17 | 3.21 |
| 3.5 | 3.50 | 3.55 | 3.60 | 3.64 | 3.69 | 3.73 | 3.77 |
| 4.0 | 4.00 | 4.05 | 4.10 | 4.15 | 4.20 | 4.25 | 4.30 |
Size Matrix of PTCA Balloon Catheter:
| L/mm D/mm | 10 | 15 | 20 | 25 | 30 | 35 | 40 |
| 1.5 | √ | √ | √ | √ | - | - | - |
| 2.0 | √ | √ | √ | √ | √ | - | - |
| 2.5 | √ | √ | √ | √ | √ | √ | √ |
| 2.75 | √ | √ | √ | √ | √ | √ | √ |
| 3.0 | √ | √ | √ | √ | √ | √ | √ |
| 3.5 | √ | √ | √ | √ | √ | √ | √ |
| 4.0 | √ | √ | √ | √ | √ | √ | √ |
1. Excellent core feeding performance.
2. Stable super lubricity hydrophilic coating, smooth delivery.
3. We cut according to the diameter of the balloon, 1.0-1.25mm can be cut into 2 wings, 1.5-5.0mm is usually 3 wings, if the diameter is more than 6.0mm, we can evenly cut into 6 wings, and then wound to keep the outline of the balloon small enough.
4. Advanced laser bonding technology between balloon and catheter provides excellent conveying performance.
5. The soft tapered tip provides a smooth transition from the guide wire port to the balloon catheter, making a great cross through the blood vessel or even a curved one.
6. Cutting edge laser forming technology is needed to make the balloon's entrance much smaller. This allows the balloon to pass through the lesion more easily.
7. To improve stability and torque transfer, we choose UV curing adhesive.
8. Positive and negative pressure test can maintain the air tightness of the whole balloon catheter. Different technical specifications can meet different requirements.
9. Our balloon catheters have a pressure of 12atm and are rated to rupture at 22atm.
10. Provides accurate expansion pressure concentration, extremely low compliance, low expansion rate from NP to RBP.
11. The short shoulder design minimizes the excessive expansion of both sides of the balloon, mainly focusing on the expansion of the lesion area and reducing the injury to normal blood vessels during the operation.
12. Excellent repackaging performance of the balloon, easy to take out after expansion.
| P/atm D/mm | Tolerance of Compliance:±5% | ||||||
| 6 (NP) | 8 | 10 | 12 | 14 | 16 (RBP) | 18 | |
| 1.5 | 1.50 | 1.53 | 1.56 | 1.59 | 1.62 | 1.65 | 1.68 |
| 2.0 | 2.00 | 2.03 | 2.06 | 2.09 | 2.12 | 2.15 | 2.18 |
| 2.5 | 2.50 | 2.54 | 2.58 | 2.61 | 2.64 | 2.67 | 2.70 |
| 2.75 | 2.75 | 2.79 | 2.83 | 2.86 | 2.89 | 2.92 | 2.95 |
| 3.0 | 3.00 | 3.04 | 3.08 | 3.11 | 3.14 | 3.17 | 3.21 |
| 3.5 | 3.50 | 3.55 | 3.60 | 3.64 | 3.69 | 3.73 | 3.77 |
| 4.0 | 4.00 | 4.05 | 4.10 | 4.15 | 4.20 | 4.25 | 4.30 |
Size Matrix of PTCA Balloon Catheter:
| L/mm D/mm | 10 | 15 | 20 | 25 | 30 | 35 | 40 |
| 1.5 | √ | √ | √ | √ | - | - | - |
| 2.0 | √ | √ | √ | √ | √ | - | - |
| 2.5 | √ | √ | √ | √ | √ | √ | √ |
| 2.75 | √ | √ | √ | √ | √ | √ | √ |
| 3.0 | √ | √ | √ | √ | √ | √ | √ |
| 3.5 | √ | √ | √ | √ | √ | √ | √ |
| 4.0 | √ | √ | √ | √ | √ | √ | √ |
注: 建议图片大小150px*50px 
