1.It owns a superior delivery performance tapered core wire.
2.Stable super-lubricity hydrophilic coating can offer a smooth delivery.
3.We section the balloon according its diameter, 1.0-1.25mm can section into 2 wings;1.5-5.0mm usually be 3 wings and if the diameter is over 6.0mm we can even section into 6 wings, then winding to keep the profile of the balloon can be small enough.
4.Progressive laser bonding technology between balloon and catheter offer an excellent delivery performance.
5.Soft tapered tip is designed to enhance the trackability of the catheter with the guidewire.
6.Tip laser forming technology makes the balloon with a small entrance, which gives a good performance of crossability.
7.UV curable adhesive between hub and hypotube enhance stablity and torque transfer.
8.We do the positive pressure test to make sure whole balloon catheter is air-proof, then keep a negative pressure test after coating hydrophilic material as well.
9.High burst pressure with excellent resistance and ultra-low compliance, NP-12atm, RBP-22atm.
10.Provide accurate concentration of expansion pressure, ultra-low compliance rate, and low inflation rate from NP to RBP.
11.Short shoulder design reduces the excess expansion at both ends of the balloon, focus mainly on the expanded lesions, and minimizes the damages to the normal vessel.
12.Excellent performance of rewrapping after balloon expansion to make it easy to withdraw.
P/atm D/mm | Tolerance of Compliance:±5% | ||||||
6 (NP) | 8 | 10 | 12 | 14 | 16 (RBP) | 18 | |
1.5 | 1.50 | 1.53 | 1.56 | 1.59 | 1.62 | 1.65 | 1.68 |
2.0 | 2.00 | 2.03 | 2.06 | 2.09 | 2.12 | 2.15 | 2.18 |
2.5 | 2.50 | 2.54 | 2.58 | 2.61 | 2.64 | 2.67 | 2.70 |
2.75 | 2.75 | 2.79 | 2.83 | 2.86 | 2.89 | 2.92 | 2.95 |
3.0 | 3.00 | 3.04 | 3.08 | 3.11 | 3.14 | 3.17 | 3.21 |
3.5 | 3.50 | 3.55 | 3.60 | 3.64 | 3.69 | 3.73 | 3.77 |
4.0 | 4.00 | 4.05 | 4.10 | 4.15 | 4.20 | 4.25 | 4.30 |
Size Matrix of PTCA Balloon Catheter:
L/mm D/mm | 10 | 15 | 20 | 25 | 30 | 35 | 40 |
1.5 | √ | √ | √ | √ | - | - | - |
2.0 | √ | √ | √ | √ | √ | - | - |
2.5 | √ | √ | √ | √ | √ | √ | √ |
2.75 | √ | √ | √ | √ | √ | √ | √ |
3.0 | √ | √ | √ | √ | √ | √ | √ |
3.5 | √ | √ | √ | √ | √ | √ | √ |
4.0 | √ | √ | √ | √ | √ | √ | √ |
content is empty!
Home Products Strength Solutions Knowledge Center Contact Us Privacy Policy